Caring for your K71-859-00 oil cap can be important and so too is the type of lubricant you use on a vehicle. Lubricant makes a world of difference and the one you choose can either make or break your machine. Fortunately, there are only two types of lubricant – grease and oil. While it might seem like a straightforward choice, it can be a little more complicated. So, what do you need to know about grease and oil lubrication?
A Careful Decision Must Be Made
Every machine is different and requires a specific type of lubricant. Choose the wrong one and yours is likely to fail miserably. You must make the right choice to keep the machine running properly. Lubrication depends on several factors, including the temperature of the components, bearing size and type, speed, load conditions, vibrations within the shaft, and the machine itself. There are also external factors to consider. That’s why it’s typically better to go with the manufacturer’s recommendations.
The Pros and Cons of Oil Lubrication
Oil is one of the simplest lubricants to work with because it’s easy to distribute. You can find it works better with components that have a higher temperature. It’s also easier to change. However, there is one major drawback of oil and that is leakage. If oil leaks out, it’s not only an environmental concern, it means the machine isn’t lubricated. It will likely cause internal problems and may lead to a blowout. That’s why you need to choose the right lubricant for your machine and ensure proper maintenance, including for the K71-859-00 oil cap.
The Pros and Cons of Grease Lubrication
Grease is messy but is incredibly effective, to say the least. When grease is applied, it remains in place and won’t leak for no good reason either. It also helps enhance your seals and doesn’t need much maintenance over the year (apart from the regular checks, of course). Of course, grease does have a drawback. It can be far tougher to clean and change.
The General Rule of Law…
If in doubt, always follow the recommendations made by the manufacturer. It’s quite simple and probably the best solution for you to consider. Remember, manufacturers are the ones who make the machine and know how best to care for it. So, it’s worth taking note of what they recommend for the running of your machine. For instance, if a vehicle manufacturer recommends (in the owner’s manual) the use of a specific lubricant, then it may be best ti heed that advice.
Choose the Best Lubricant for Your Vehicle
Lubrication isn’t always given much thought when it comes to the operation of a vehicle. While manufacturers put great thought into the correct oil or grease, owners don’t. It’s quite simple: you don’t think about lubricants. Unless you’re a mechanic, your mind doesn’t think about the internal components – or their maintenance. It’s easy to overlook but you mustn’t do because it can lead to bearing failures and more. So, choose the right lubricant and keep up with the maintenance, including the bearings and K71-859-00 oil cap.