K71-859-00 requires excellent maintenance to avoid problems; it’s the same with wheel bearings. A trailer’s wheel bearings are a crucial component and must be well maintained over the year. Regardless of the size of the trailer, it must be routinely maintained to allow it to run at full capacity. Greasing the wheel bearings is a must, but how often should you grease the trailer’s wheel bearings?
A Routine Grease is Necessary
It’s difficult to say for certainty how often a trailer’s wheel bearings should be greased because it depends on the size of the trailer, its weight load, and the wheel size. If nothing else, the bearings should be greased at least every ten thousand miles. This is a golden rule and something you should adhere to. Of course, if you have a relatively smaller trailer and it is used less often, you could stretch to twelve thousand miles before greasing the wheel bearings.
It Depends on Your Trailer
Some trailers require more frequent attention, say every two or three thousand miles rather than ten thousand. For instance, smaller wheels on a boat trailer will typically need to be greased every few thousand miles. Remember, a smaller wheel will spin faster so there is more pressure on them; that will mean the bearings need to be greased more often. It’s the same when your trailer is in constant use or reached its load capacity. Click here to read more about Most Useful Dexter Axle Frequently Asked Questions.
Greasing the Wheel Bearings
Anyone that has worked with a K71-859-00, will know the importance of good maintenance. Greasing the wheel bearings isn’t difficult to do. It’s pretty straightforward actually and little mechanical know-how is required. You’ll need tools, such as a hammer, rags, wheel jack, stands, grease, and a torque wrench to get the job done right.
To grease the bearings, you’ll need to jack up the trailer and remove the wheels. (Keep the washer, spindle nut, and retainer safe as you’ll need them to put the wheel back on later.) Pump the grease and rotate the hub. Once this is done, replace the wheel and remove the jack.
Should You Choose the DIY Route or Go to a Mechanic?
Greasing the wheel bearings isn’t difficult to do and will cost far less than if you were to take it to a mechanic. On the other hand, if you don’t know what you’re doing or aren’t able to grease the bearings, a mechanic is the right person for the job. Greasing the wheel bearings needs someone with patience so everything is done correctly.
Good Maintenance Avoids Trouble
Trailer maintenance is not a task that should be taken lightly. These are dangerous vehicles to be on the road and if you don’t maintain them well, things can go badly wrong. Greasing the wheel bearings is easy with a little know-how. Of course, if you need help, going to a mechanic is probably your best bet. It won’t cost much, and everything can be serviced correctly. Whether you’re looking to replace a K71-859-00 or just tune up the bearings, doing so properly will make a huge difference. You can read about Various Filters that Have Been Keeping Oil cleaners for 85 Years.
